crank bearing
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
the bearings seem fine when i rotat them, the way the motor suposed to but. when it goes backward it make bad sounds but seem smooth going in the right way. and they seem like i can allmost take them out like there going to fall. but i cant pull them out. how much r new ones what about z400 bearing.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
QUOTE (250rrider911 @ Aug 4 2008, 09:57 PM) <{POST_SNAPBACK}>
ok i took the casing off and i didnt see any. copper color of any sort ,but i might just get the bearing just to be safe.
are you working with the rod bearing or crank bearings?? just asking cause to get the rod bearing out you need to press the crank apart and the way i understand it is if you dont press the crank apart correctly you can wreck it. the bearings should move freely in either direction if the dont replacing them is a good idea.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
It might be the Eleventh Commandment of Cannondaleriders.com, but ...
"Though shalt not put an 18-roller big-end rod bearing back in a Cannondale " -- not once you have it out and in your hand anyway.
But I'm with darkknight on not being sure of whether you are talking about the crank side mainbearings?,... or the single internal rod bearing? If the main bearings are "notchy" it is recommended to replace them. They feel rough for a reason, and that reason is usually hard metal debris inside wearing at the rollers and races.
...email, PM, or call for prices.
"Though shalt not put an 18-roller big-end rod bearing back in a Cannondale " -- not once you have it out and in your hand anyway.
But I'm with darkknight on not being sure of whether you are talking about the crank side mainbearings?,... or the single internal rod bearing? If the main bearings are "notchy" it is recommended to replace them. They feel rough for a reason, and that reason is usually hard metal debris inside wearing at the rollers and races.
...email, PM, or call for prices.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
bikebandit.com has them for $40-$48.
http://www.bikebandit.com/houseofmotorcycl...cz-2005/o/m6506
I worked at an Arctic Cat dealer late last year, I wish I had thought to do that I could have ordered a bunch at cost.
Someone here has to work for a dealer?
http://www.bikebandit.com/houseofmotorcycl...cz-2005/o/m6506
I worked at an Arctic Cat dealer late last year, I wish I had thought to do that I could have ordered a bunch at cost.
Someone here has to work for a dealer?