2003 Cannibal LE 450 with MANY UPGRADES! WILL PART OUT

Message

Fash00 · #1 Post by **Fash00** » Wed Jul 30, 2008 7:23 pm

Lets see if i can remember everything. Its a 2003 Canninbal LE for starters.

Motor Upgrades-

*New Crank with Z400 bearing done by timbomoose
*Head porting and polishing done by timbomoose
*New Cams
*Blue Bolt Kit from caniboomer
*All engine mount updates
*Aluminum Valve Cover
*New Piston
*Full hmf exhaust
*Ported Tb
*Been tuned once but needs fine tuning
*new starter
*New Battery

Whole motor was just gone through and has no more then 3 rides on it so maybe 7 hours.

Suspension Upgrades-
*Moto A-arms Powdercoated Candy Blue
*Swingarm Powdercoated Candy Blue with all new bearings and seals
*2004 Moto Ohlins w/added travel/longer main spring.
ZPS conversion by MX-Tech.
4 races on rebuild and fully adjustable.
Hardly a scratch on them.
*New tie rods and braided brake lines
*Moto axle

I traded a z400 and cash for the quad and rebuilt the whole thing ground up with the best parts it also has new fuel pump,brakes,and a ton of extras. I would rather sell the quad whole then part out but will do whatever is necessary.Start at $4500 for everything heres the only pics i have now of it during its spring cleaning and frame is polished to mirror finish

Best way to contact me is thru email via fash00@aol.com

Fash00 · #2 Post by **Fash00** » Wed Aug 06, 2008 6:13 pm

TTT.. Went out to start and it wont start acts like timing is off so either the computer dropped the map or the keyway is messed up because the flywheel is brand new and not spun. Make offers for whole thing I dont care im tired of looking at it $3000 come and get it

Fash00 · #3 Post by **Fash00** » Fri Aug 08, 2008 2:54 pm

Ok then its part out time. Complete front end with a arms/brake lines/tierods/shocks $1300

Motor-$1500 obo

Rest of stuff make offers on im tired of it sitting and doing nothing.

Derno24 · #4 Post by **Derno24** » Mon Aug 11, 2008 12:52 am

Care to sell the exhaust??

moto440 · #5 Post by **moto440** » Mon Aug 11, 2008 1:07 pm

how much for the complete boomer intake? uni filter or k&N

Fash00 · #6 Post by **Fash00** » Mon Aug 11, 2008 2:57 pm

I will sell it all but only after big items go such as front end and motor

MyCannibal · #7 Post by **MyCannibal** » Mon Aug 11, 2008 3:49 pm

how come that front end looks tweaked...the bumper or something?...

IRONSIDE · #8 Post by **IRONSIDE** » Mon Aug 11, 2008 5:03 pm

pm sent on the motor.

Fash00 · #9 Post by **Fash00** » Mon Aug 11, 2008 6:48 pm

Bumper was off another quad and is tweaked i can only get 3 bolts in it.Thats the last thing i was going to replace but just lost the interest in riding

moto440 · #10 Post by **moto440** » Mon Aug 11, 2008 8:09 pm

ok well keep me in mind for the intake please thank you