Post your dyno charts here!
wistech
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#1
Post
by wistech » Thu Aug 21, 2008 8:59 pm
This is a ported 432 from 2006 cyclone intake ,fmf exhaust . looking at the afr lines which one do you think puts out the best/smoothest torque and horsepower by far? Hint its at least 3.5 horse. Which one would be the weakest?
jinx44
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#2
Post
by jinx44 » Thu Aug 21, 2008 9:14 pm
Best/smoothest: Blue
Weakest: Yellow
The one I would want it to look like when it left the dyno: Red
That's my guess.
big.elk.hunter
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#3
Post
by big.elk.hunter » Thu Aug 21, 2008 11:54 pm
I'm going to guess that the green would be the best and the yellow the weekest? chris
peterock
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#5
Post
by peterock » Fri Aug 22, 2008 2:47 am
I'm with Steve on this one. Those are horrible. Which ever had the best horse power would be a lot better if it was smoother. But if I had to pick the one with the highest HP number, it would be the yellow.
jwheat
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#6
Post
by jwheat » Fri Aug 22, 2008 3:27 am
I think the purple produced the best HP and the green produced the least.
wistech
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#7
Post
by wistech » Fri Aug 22, 2008 2:10 pm
Keep trying. By the way the lines may look like they are wavering a huge amount but this is in full screen . If you put it in a split screen like we usually do there isn't as much exageration.
peterock
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#8
Post
by peterock » Fri Aug 22, 2008 4:16 pm
This is full screen as well..................
Sorry John, kind of a useless post as nothing can really be determined from those AFR's except that you need to go back to the dyno.
wistech
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#9
Post
by wistech » Fri Aug 22, 2008 5:17 pm
So your saying AFR doesnt have any usefull effect on horsepower? Im an not so sure.
jinx44
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#10
Post
by jinx44 » Fri Aug 22, 2008 5:33 pm
So your saying AFR doesnt have any usefull effect on horsepower? Im an not so sure.
Dyno HP and useful HP are too different things.