Power Commander Group Buy
Pete,
Get me one before the group ride (even if it's a loaner for now), as we are going to the Dyno where Tim goes in PA before the ride and they have the tuning link. It's an awesome shop and the guy there is very knowledgable with the tuning link set-up. Hopefully it will show the greatest improvement and put this thing to the test once and for all.
Ken
Get me one before the group ride (even if it's a loaner for now), as we are going to the Dyno where Tim goes in PA before the ride and they have the tuning link. It's an awesome shop and the guy there is very knowledgable with the tuning link set-up. Hopefully it will show the greatest improvement and put this thing to the test once and for all.
Ken
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
QUOTE (cannondale27 @ Sep 3 2008, 09:28 PM) <{POST_SNAPBACK}>
Bring him food and refreshments.Make him your friend because the dyno can be very addicting!
I might do that. He said it takes him about 2 to 3 hours to custom make a map. He said most people just go get something to eat then come back. He was telling me on some bikes the PC is only on when the bike is running and off while cranking. So on bikes that start with the PC off if where hard to start before still are hard to start providing the tuning is right. The PC takes over once cranking is stopped and bike running. He said on some bikes he has had to have the PC powered while cranking, so he just finds a hot wire. Do we know if the Cdale pc is hot while cranking or not?