Another weekend of riding, another week of wrenching...woohooo!!!!
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
So here are the symptoms fellas, Overheating!, coolant is at right point on the tank, ride/beat the **** out of it for 15 mins, coolant level raises and motor overheats, wont start back up. Once it does start it boggs real bad and starts spitting at me when I try givin it some juice on the way back to the truck. kept happening all day, but it kept running great after a 45 rest, and coolant would always, except once, return to ok level. One time i did lose about half of the coolant. am i blocked up? impeller seized? all who have knowledge chime in please another thing it did usually idle ok once it started back up after a while , but it would not accept giving it throttle..
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Drain radiator - Remove hose from side of water pump housing - Inspect impeller, see if it turns on the cam (which means stripped). That is how you inspect the water pump.....
A good idea may be for you to order a status light kit from Boomer, which will give you real time info on whether you are overheating, battery is charging, and whether the ECU has a fault...
A good idea may be for you to order a status light kit from Boomer, which will give you real time info on whether you are overheating, battery is charging, and whether the ECU has a fault...
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Check your impeller cover at the nipple,mine was clogged,I had to drill it out.Do you have an aluminum or magnesium valve cover.Also,try loosing top left screw on the impeller cover untill it seeps coolant.Wistech had a post about standing the quad on the gradbar for a few minutes to help bring up air pockets.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm