Injector Fault codes

Message

alexw1991 · #1 Post by **alexw1991** » Mon Apr 06, 2009 8:15 pm

So now I get an fault code on both injectors. This code will go away and come back after a few starts. I am using the LM-2 AFR reader and about 8000 rpm my afr will drop like a rock then go back to normal about 8800 rpm.

So what i'm asking is, are my injectors bad?

Thanks for the info.

cannondale27 · #2 Post by **cannondale27** » Mon Apr 06, 2009 11:08 pm

Maybe they are sticking?

speedracer · #3 Post by **speedracer** » Tue Apr 07, 2009 1:24 am

QUOTE (cannondale27 @ Apr 6 2009, 06:08 PM) <{POST_SNAPBACK}>

Maybe they are sticking?

How do injectors stick?just curious.

alexw1991 · #4 Post by **alexw1991** » Tue Apr 07, 2009 2:12 am

QUOTE (cannondale27 @ Apr 6 2009, 06:08 PM) <{POST_SNAPBACK}>

Maybe they are sticking?

How do I fix that? or are they trash?

cannondale27 · #5 Post by **cannondale27** » Tue Apr 07, 2009 11:32 am

Can get gummed up and either stick open or closed.Not sure if they would throw a code though.Most of time its a plug disconnected when code is shown.

67z400 · #6 Post by **67z400** » Tue Apr 07, 2009 11:53 am

I agree with 27 the only code I have received from the injectors is because they came unplugged.

speed 450mx · #7 Post by **speed 450mx** » Tue Apr 07, 2009 4:04 pm

I have had one show a code when the injerctor was stucked closed.

alexw1991 · #8 Post by **alexw1991** » Tue Apr 07, 2009 6:16 pm

QUOTE (speed 450mx @ Apr 7 2009, 11:04 AM) <{POST_SNAPBACK}>

I have had one show a code when the injerctor was stucked closed.

Thats what I thing is going on. So if that is the case, how do I clean them?

cannondale27 · #9 Post by **cannondale27** » Wed Apr 08, 2009 11:36 am

Tap on them carefully or maybe soak the in some injector cleaner.

alexw1991 · #10 Post by **alexw1991** » Wed Apr 08, 2009 2:57 pm

QUOTE (cannondale27 @ Apr 8 2009, 06:36 AM) <{POST_SNAPBACK}>

Tap on them carefully or maybe soak the in some injector cleaner.

Cool thanks for the info steve