Question on Different Cranks and pistons in Dales
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
The issue with the reagle injectors was the way they did it. Speed1b head is nothing like the hack jobs winky and WWE were doing . The bungs they put in caused a huge restiction in the intake tract cutting off airflow. Speeds head has had the bungs reworked to it it get it to function . Half the time they didnt even weld the bungs in symetrical to each other.
As far as the winky oil mod it didnt address the ripsaw bearing problem .It just changed where the oil was going the left crank bearing in a pointless attempt to get more oil to the ripsaw.
As far as the winky oil mod it didnt address the ripsaw bearing problem .It just changed where the oil was going the left crank bearing in a pointless attempt to get more oil to the ripsaw.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Well I took the cannondale out to the desert this weekend. it ran like a champ. It leaked alittle bit of oil and raditor water, i kept checking it to make sure i wasnt too low.
I need to find out whats causing it to leak. But other than that, i was happy with the bike. And it dosnt feel like it has anywhere near the hp that this bike was supposed to have. I think its very similar to a regular 450 yamaha or honda. But i will tell you that these HIDS light up the whole desert. haha. super bright lights.
thought i would let everyone know how the bike ran, if anybody was wondering.
thx
jesse
I need to find out whats causing it to leak. But other than that, i was happy with the bike. And it dosnt feel like it has anywhere near the hp that this bike was supposed to have. I think its very similar to a regular 450 yamaha or honda. But i will tell you that these HIDS light up the whole desert. haha. super bright lights.
thought i would let everyone know how the bike ran, if anybody was wondering.
thx
jesse
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
QUOTE (dune_rider81 @ Apr 27 2009, 07:12 AM) <{POST_SNAPBACK}>
Well I took the cannondale out to the desert this weekend. it ran like a champ. It leaked alittle bit of oil and raditor water, i kept checking it to make sure i wasnt too low.
I need to find out whats causing it to leak. But other than that, i was happy with the bike. And it dosnt feel like it has anywhere near the hp that this bike was supposed to have. I think its very similar to a regular 450 yamaha or honda. But i will tell you that these HIDS light up the whole desert. haha. super bright lights.
thought i would let everyone know how the bike ran, if anybody was wondering.
thx
jesse
I need to find out whats causing it to leak. But other than that, i was happy with the bike. And it dosnt feel like it has anywhere near the hp that this bike was supposed to have. I think its very similar to a regular 450 yamaha or honda. But i will tell you that these HIDS light up the whole desert. haha. super bright lights.
thought i would let everyone know how the bike ran, if anybody was wondering.
thx
jesse
Where is the coolant leaking from? Mine was leaking from the cap and was probably an indication that I had a issues with the cylinder being short, it finally blew the oring between the cylinder and combustion chamber. Keep your eye on it.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
QUOTE (Kuma @ Apr 27 2009, 08:28 PM) <{POST_SNAPBACK}>
Where is the coolant leaking from? Mine was leaking from the cap and was probably an indication that I had a issues with the cylinder being short, it finally blew the oring between the cylinder and combustion chamber. Keep your eye on it.
well it looked like it was coming from towards the top of the cylinder on the right side. you can see it was running down the cylinder. Im going to try and check it out in the next day or so. Ill keep you informed.
thx
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
QUOTE (dune_rider81 @ Apr 27 2009, 06:32 PM) <{POST_SNAPBACK}>
well it looked like it was coming from towards the top of the cylinder on the right side. you can see it was running down the cylinder. Im going to try and check it out in the next day or so. Ill keep you informed.
thx
thx
Mine did that at first. I tightened the impeller cover and that fixed it.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Have seen some guys running without a hose clamp on the bleed hose, Also is supposed to be a aluminum or copper washer on the bleed screw in upper right of waterpump cover. Or like said might just be leaking gasket especially if Mag valvecover from rot. If leak is coming from below water pump(weephole) it means your waterpump seal is bad or really rotted cover. Alot of the caps will leak. A hose clamp lightly tightened around cap keeps it from distorting and leaking.