Fuel Pump/Regulator Relocation
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
I was bored last night and I wanted to remove the clutter in front of my engine. No drilling was necessary...just a little grinding to the stock fuel pump mount so it would clear the plug for the ECU. The only other thing needed to do this is longer fuel lines, and a pod filter setup. The regulator mounts where the front of the stock air box would mount. Sorry for the dirty ecu tray, i had a oil puking problem a long time ago and the dust and dirt turned to a kind of dirty cement. Also, that shifter is my crappy spare one. I need to re-tap my other one that is nice and not rusted at the end.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Very cool. One thing I'm finding as I try to step from rookie.... is these Cannon's lead to some tinkering. A little too much unlocked potential? Silly question maybe, but can I find a write up on the brief history on these quad and bikes (the people and thought behind the flash history)? ..Sorry for jumping on the post.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
I dont know about any official write up about the history, but I could write about book about my own experiences with this thing . Cannondale was the first EFI sport quad (as far as i know). They beat the rest of the big manufacturers by about 8 years along with the first aluminum frame (excluding dirtbikes).
http://www.cannondaleriders.com/forums/ind...p;hl=build+hope I'm not sure if I have a pic with the hood off or not?
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
I'm not running that batt anymore. It was a little to small,so I ended up going with the 5ah http://turntechbattery.com/TurnTech%20Battery/Welcome.html. To be honest I'm not sure how it measures out agents the stock bs9.
I'm 90% sure it could be done with out cutting any wires? But I did it anyways just for the sake of less clutter. The only thing that really stands out is making a longer starter cable.
I'm 90% sure it could be done with out cutting any wires? But I did it anyways just for the sake of less clutter. The only thing that really stands out is making a longer starter cable.