Title says it all. did they have one and where did it mount. thanks.
chris
did the X440S originally have a voltage regulator?
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Thanks Dave, I do have the three wire stator system, and regulator. It had been mounted on the right side of the sub-frame using one of the bolts that mounts the number plate(?). I was just currious if that was the best place to mount it? as I just replaced the batt box and would have to cut the side of it to mount it there again.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
You won't have to cut or hack...you can fish the wiring for the larger Vreg near the upper right seam between batt tray and fender and mount it in the upper right wheel well...external compared to stock, and a cooler location....as long as it clears the tire travel and numplate. OK...one or 2 bolts. No bracket was required, and just maybe a small slot to route the wire.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm