Motor Breakdown
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Got rest of parts in today. Gonna put in new CP 97mm piston, new valves, have shims for adjustments, etc. Gonna get it together Saturday and if I get lucky, may get it in quad on Sunday.
On another note, 2000ex has a 97mm piston, but does anyone have a 97mm cylinder? Or can a stocker be bored to work for it? If this works out I'd like to build the roller I got with this one. Has everything but a main case, crank, and piston/cylinder. Rest is there is bags/boxes. Would like to get this going and then start on that if all pans out.
On another note, 2000ex has a 97mm piston, but does anyone have a 97mm cylinder? Or can a stocker be bored to work for it? If this works out I'd like to build the roller I got with this one. Has everything but a main case, crank, and piston/cylinder. Rest is there is bags/boxes. Would like to get this going and then start on that if all pans out.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
That's what has already been done. I'm going to look for a second set as a backup if the thing runs good and rips which is why I'm asking about a new cylinder. Have a stock brand new set from previous owner for second quad but would want some extra power, unless a stroker is easily available. I've seen them, but are stroker kits easily available? I actually found a crank in the box of parts that looks brand new. Says ATK crank on it with sharpie but would want to tear down for bearing, but is there a kit for rod and such to stroke these around?