Possible sell out
Would anybody be interested in a bunch of cannondales, all at once? I have found that I have lost interest in ATVs. I need the room for other projects. At this point, I am only interested in everything being sold at once. I may decide to seperate or part things out at a later date. Please do not post asking for individual bikes or parts.
Running:
'02 E440. Excellent condition, shows 74 miles. Not updated and coolant has started to mix with oil
'02 Cannibal. Updated, ported 432. Canniboomer tank, HMF, runs great.
'01 FX400. Non-updated. Does have Stage 8 bolts. Excellent condition.
'03 Cannibal LE. Said to be updated, runs great. FMF Ti can. Excellent condition.
Complete, non running:
'02 moto. Oil pump gears are stripped.
'01 FX400. 2.2mm, head from UPSman's bike, excellent condition. Rod came through the case a couple weekends ago. Boomer tank
'02 Cannibal. Updated, ran great but lost compression. Nice condition. Boomer tank
Almost complete:
'02 Speed. Ported 2.2mm stroker. Engine ran in a moto, pulled it to put in the speed. Just needs finished hooking things up.
Rollers:
'02 moto. Axis shocks (springs are rusty)
'02 cannibal TT bike. Aftermarket A-arms, moto axle, short swingarm
'01 FX400. No wheels or tires. Basically a suspended chassis.
'02 Blaze. Complete roller. I have the complete engine that dropped valves as well.
I also have another '02 Moto frame, axle, head with FX cams, seat, plastic, etc. Shocks, a-arms, and other parts have been sold off of it. It does have a Rev8 harness.
Parts:
Extra cases, heads, new cams, spare cams, manuals, degree wheel, etc. Also extra boomer tank kit. Extra plastics, seats (including a glamis), tanks, etc.
I am sure there is much that I am leaving out. If someone is seriously interested, I will get pictures for them. It will be time consuming, so I am not going to bother unless there is interest. I really don't have the spare time.
I have a few cranks (2-3, can't remember. lol) Sitting at Timbos.
I have titles for some (open), MSO on a couple, nothing on others.
$12,000 negotiable for everything. May entertain trades as well.
Running:
'02 E440. Excellent condition, shows 74 miles. Not updated and coolant has started to mix with oil
'02 Cannibal. Updated, ported 432. Canniboomer tank, HMF, runs great.
'01 FX400. Non-updated. Does have Stage 8 bolts. Excellent condition.
'03 Cannibal LE. Said to be updated, runs great. FMF Ti can. Excellent condition.
Complete, non running:
'02 moto. Oil pump gears are stripped.
'01 FX400. 2.2mm, head from UPSman's bike, excellent condition. Rod came through the case a couple weekends ago. Boomer tank
'02 Cannibal. Updated, ran great but lost compression. Nice condition. Boomer tank
Almost complete:
'02 Speed. Ported 2.2mm stroker. Engine ran in a moto, pulled it to put in the speed. Just needs finished hooking things up.
Rollers:
'02 moto. Axis shocks (springs are rusty)
'02 cannibal TT bike. Aftermarket A-arms, moto axle, short swingarm
'01 FX400. No wheels or tires. Basically a suspended chassis.
'02 Blaze. Complete roller. I have the complete engine that dropped valves as well.
I also have another '02 Moto frame, axle, head with FX cams, seat, plastic, etc. Shocks, a-arms, and other parts have been sold off of it. It does have a Rev8 harness.
Parts:
Extra cases, heads, new cams, spare cams, manuals, degree wheel, etc. Also extra boomer tank kit. Extra plastics, seats (including a glamis), tanks, etc.
I am sure there is much that I am leaving out. If someone is seriously interested, I will get pictures for them. It will be time consuming, so I am not going to bother unless there is interest. I really don't have the spare time.
I have a few cranks (2-3, can't remember. lol) Sitting at Timbos.
I have titles for some (open), MSO on a couple, nothing on others.
$12,000 negotiable for everything. May entertain trades as well.
That is a great opportunity for someone to pick up an entire fleet of machines. You could operate a full race team for a while with that much inventory, and for that price it is cheaper than building 1 450R that is loaded to the hilt.
I am at my limit for machines now, although I have been saying that about 4 machines ago
I am at my limit for machines now, although I have been saying that about 4 machines ago
QUOTE (kdeal @ Oct 21 2011, 10:56 AM) <{POST_SNAPBACK}>
12 BIKES = 12K,
This is a steal!
This is a steal!
I had to recount, thought I had forgot one. LOL There are actually 13 total, though a couple (FX and moto) are basketcases.
QUOTE (Happyboy @ Oct 21 2011, 01:21 PM) <{POST_SNAPBACK}>
fark me...so glad i don't live in arkansas anymore!
Heartland of America. Just a short drive from anywhere. LOL
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
>>Would anybody be interested in a bunch of cannondales, all at once?
>> '02 E440. Excellent condition, shows 74 miles. Not updated and coolant has started to mix with oil
>>Rollers:
'02 moto. Axis shocks (springs are rusty)
>>I also have another '02 Moto frame, axle, head with FX cams, seat, plastic, etc. Shocks, a-arms, and other parts have been sold off of it. It does have a Rev8 harness.
>>Parts:
Extra cases, heads, new cams, spare cams, manuals, degree wheel, etc. Also extra boomer tank kit. Extra plastics, seats (including a glamis), tanks, etc.
>>I am sure there is much that I am leaving out. If someone is seriously interested, I will get pictures for them. It will be time consuming, so I am not going to bother unless there is interest. I really don't have the spare time.
hi, jinx44,
so, I have an '02 X440s, runs fine,
but I don't ride dirt, am in NJ,
I need to make this streetable, lights, turn-signals etc,
"Rollers: '02 moto."
was the moto streetable ?
when You're done with the major sale. would You sell the frame from the moto ?
or info. on the VIN ?
I just need frame or info. on a VIN from E440 or moto,
pls, help me keep this C'dale running...
thx georgeR,
>> '02 E440. Excellent condition, shows 74 miles. Not updated and coolant has started to mix with oil
>>Rollers:
'02 moto. Axis shocks (springs are rusty)
>>I also have another '02 Moto frame, axle, head with FX cams, seat, plastic, etc. Shocks, a-arms, and other parts have been sold off of it. It does have a Rev8 harness.
>>Parts:
Extra cases, heads, new cams, spare cams, manuals, degree wheel, etc. Also extra boomer tank kit. Extra plastics, seats (including a glamis), tanks, etc.
>>I am sure there is much that I am leaving out. If someone is seriously interested, I will get pictures for them. It will be time consuming, so I am not going to bother unless there is interest. I really don't have the spare time.
hi, jinx44,
so, I have an '02 X440s, runs fine,
but I don't ride dirt, am in NJ,
I need to make this streetable, lights, turn-signals etc,
"Rollers: '02 moto."
was the moto streetable ?
when You're done with the major sale. would You sell the frame from the moto ?
or info. on the VIN ?
I just need frame or info. on a VIN from E440 or moto,
pls, help me keep this C'dale running...
thx georgeR,
would you seperate? if so how much for the complete moto non running with oil pump gears stripped.
>> '02 E440. Excellent condition, shows 74 miles. Not updated and coolant has started to mix with oil
>>Rollers:
'02 moto. Axis shocks (springs are rusty)
>>I also have another '02 Moto frame, axle, head with FX cams, seat, plastic, etc. Shocks, a-arms, and other parts have been sold off of it. It does have a Rev8 harness.
>>Parts:
Extra cases, heads, new cams, spare cams, manuals, degree wheel, etc. Also extra boomer tank kit. Extra plastics, seats (including a glamis), tanks, etc.
>>I am sure there is much that I am leaving out. If someone is seriously interested, I will get pictures for them. It will be time consuming, so I am not going to bother unless there is interest. I really don't have the spare time.
hi, jinx44,
so, I have an '02 X440s, runs fine,
but I don't ride dirt, am in NJ,
I need to make this streetable, lights, turn-signals etc,
"Rollers: '02 moto."
was the moto streetable ?
when You're done with the major sale. would You sell the frame from the moto ?
or info. on the VIN ?
I just need frame or info. on a VIN from E440 or moto,
pls, help me keep this C'dale running...
thx georgeR,[/quote]
>> '02 E440. Excellent condition, shows 74 miles. Not updated and coolant has started to mix with oil
>>Rollers:
'02 moto. Axis shocks (springs are rusty)
>>I also have another '02 Moto frame, axle, head with FX cams, seat, plastic, etc. Shocks, a-arms, and other parts have been sold off of it. It does have a Rev8 harness.
>>Parts:
Extra cases, heads, new cams, spare cams, manuals, degree wheel, etc. Also extra boomer tank kit. Extra plastics, seats (including a glamis), tanks, etc.
>>I am sure there is much that I am leaving out. If someone is seriously interested, I will get pictures for them. It will be time consuming, so I am not going to bother unless there is interest. I really don't have the spare time.
hi, jinx44,
so, I have an '02 X440s, runs fine,
but I don't ride dirt, am in NJ,
I need to make this streetable, lights, turn-signals etc,
"Rollers: '02 moto."
was the moto streetable ?
when You're done with the major sale. would You sell the frame from the moto ?
or info. on the VIN ?
I just need frame or info. on a VIN from E440 or moto,
pls, help me keep this C'dale running...
thx georgeR,[/quote]