Herrmann MX Arms
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Bought these last summer from here as +3 arms and had them in a box for months. Put them on, mounted up, adjusted, etc, and they are not +3 afterall. Max width with a 3:2 wheel is about 48.5". They are long travel but only about 1.25" longer each side than stock and are only camber adjustable.
When I bought them they had new spherical joints installed and I believe I paid $330. I have since replaced all four tie rod ends with the upgraded Blackwidow ones and also replaced a tie rod due to a slight, barely noticable bend that made me uneasy, (read my "Ouch" post to see why, lol) which ran me a total of $76.
I have $406 into these. Ready to run and real nice quality, just wont make the quad 50" wide like I wanted.
$400 shipped firm. Will use on playquad otherwise. May trade for some aftermarket parts.
Trav
Located in southern California.
7six0-7zero7-7897. Text first!
Will upload pics later. Can text them now.
When I bought them they had new spherical joints installed and I believe I paid $330. I have since replaced all four tie rod ends with the upgraded Blackwidow ones and also replaced a tie rod due to a slight, barely noticable bend that made me uneasy, (read my "Ouch" post to see why, lol) which ran me a total of $76.
I have $406 into these. Ready to run and real nice quality, just wont make the quad 50" wide like I wanted.
$400 shipped firm. Will use on playquad otherwise. May trade for some aftermarket parts.
Trav
Located in southern California.
7six0-7zero7-7897. Text first!
Will upload pics later. Can text them now.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
I plan on getting another ASR front end as they're adjustability and quality are top notch now that they have better tie rods. So I'd have to pass on that. Previous owner ran Moto shocks without issues. I haven't actually done up the measurements to see what they take but I have an 18.6" set on them now with 5.8" of stroke for mock up and at full bottom out the tie rods are a little close for comfort. Stock Moto shocks only have I believe 5.6" stroke and are .1" longer so I would think a perfect match.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
QUOTE (who_gives_a6 @ Apr 23 2012, 08:39 PM) <{POST_SNAPBACK}>
Buyer has not yet paid. Willing to do partial trades on some parts i need but mostly need cash. Until paid for, they are back up for sale. Can't wait forever.
What parts are you still needing?
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm