Bike Clutch Basket
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
The needle bearings for the clutch basket are used in the later models and are a K25x29x10 bearing. Unfortunately you cannot just press out the bushing and install the bearings. You need to machine out the center of the basket an additional amount to use the bearings. Be warned the basket is heat treated and you run the risk of premature bearing failure due to the surface being softer after machining..... My opinion, just get a basket already bearing ready from the factory.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm