Moto part out very clean
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Not sure what i wanna do yet. Depends how much interest i get
Possibly parting out my moto... This quad is mint!
OPEN TO REALISTIC OFFERS
PRICES DO NOT INCLUDE FREIGHT
Motor will be parted out
Head is mint, ported by wistech, dlc coated buckets and cams are mint ( have 800 ish into this) id like $495 SOLD
Crank is rebuilt / balanced with z400 bearing ready to go
$350 SOLD
Trans and clutch are like new make offer??
Engine cAses Are very clean! Make offer?
Elka front shocks Are compression and rebound adjust $695
Rear elka also comp and rebound adjust. $475
Frame/ powder coated subframe $175
Full set of plastic with graphics and seat ( this includes billet seat latch) minor small cracks around some bolt holes. They are plastic welded. Graphics alone were 150
$400
Full hmf exhaust 195.00
Has brand new packing, hmf tag and billet end cAp
Fmf moto exhaust. CAn in ruff shape. Headers mint $100.00 SOLD
Moto a arms, spindles, hubs, tie rods and ends. $495
Balljoints, powder coat, pivot bearings and rod ends are like new!!!
Moto axle, hubs, lock nut $150??
Carrier with like new bearings $79
Moto bumper with custom stabalizer set up $100
Moto Nerfs with brand new nets $100
Fuel tank. Make offer
Moto steering stem and fat bars $150
Ecu $ 150 ??
Fuel pump $50
Flywheel $65.00
Stator ?? Make offer SOLD
Swingarm with like new bearings. Chain sliders and guides inc $80
Rims and tires 150 front 150 rear
I have alot of time and money in this quad. If my prices are high its because i spent hours making these parts mint ( front end for example)
Wistech did the crank and head work and it truly is a piece of art
Possibly parting out my moto... This quad is mint!
OPEN TO REALISTIC OFFERS
PRICES DO NOT INCLUDE FREIGHT
Motor will be parted out
Head is mint, ported by wistech, dlc coated buckets and cams are mint ( have 800 ish into this) id like $495 SOLD
Crank is rebuilt / balanced with z400 bearing ready to go
$350 SOLD
Trans and clutch are like new make offer??
Engine cAses Are very clean! Make offer?
Elka front shocks Are compression and rebound adjust $695
Rear elka also comp and rebound adjust. $475
Frame/ powder coated subframe $175
Full set of plastic with graphics and seat ( this includes billet seat latch) minor small cracks around some bolt holes. They are plastic welded. Graphics alone were 150
$400
Full hmf exhaust 195.00
Has brand new packing, hmf tag and billet end cAp
Fmf moto exhaust. CAn in ruff shape. Headers mint $100.00 SOLD
Moto a arms, spindles, hubs, tie rods and ends. $495
Balljoints, powder coat, pivot bearings and rod ends are like new!!!
Moto axle, hubs, lock nut $150??
Carrier with like new bearings $79
Moto bumper with custom stabalizer set up $100
Moto Nerfs with brand new nets $100
Fuel tank. Make offer
Moto steering stem and fat bars $150
Ecu $ 150 ??
Fuel pump $50
Flywheel $65.00
Stator ?? Make offer SOLD
Swingarm with like new bearings. Chain sliders and guides inc $80
Rims and tires 150 front 150 rear
I have alot of time and money in this quad. If my prices are high its because i spent hours making these parts mint ( front end for example)
Wistech did the crank and head work and it truly is a piece of art
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
QUOTE (yamadjs08 @ Aug 22 2013, 12:48 AM) <{POST_SNAPBACK}>
Does it run? Whats wrong with it? Why part it out?
Had a scavenge pump failure. Took apart to see what was up and found it had locked and broke plastic oil pump gear.
Head, cases, crank, trans/clutch, starter gear are all mint
Overall. Love this quad but do not have time for riding it anyway
Working 6 days a week and a shop full of customer bikes....no more time for this right now
Was going to do 460 kit. But holding off and moving on
I need more than the 432. How ever this is faster than most 450s i have ridden.
Will be back on my crf450r for now on, local tracks are bike friendly anyway
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm