Interesting issue happened today. Quad died out randomly and wouldn't start. Looked down and the negative pump terminal was ripped in half. So I'm sure it grounded out. Completely killed the battery so tried jump starting after a temporary terminal fix. Pump will prime but when you hit the starter it won't do anything. Let off the starter and it'll prime again and then let out a short but loud buzzing sound.
Any suggestions? Hoping the ECU isn't toast, but have spares. Possibly just the pump got fried? I can test another pump/ecu tomorrow but figured I'd pick some brains first.
Also, can these pumps be torn apart to replace a terminal or will I just be needing to buy a new pump? The terminal is broken beyond usage.
Fuel Pump Woes
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Well, replaced fuel pump, reprogrammed the ECU, and back in business.
Went riding this morning and coming out of a corner it locked up. Pulled spark plug and oh joy. Major failure. Zero shavings in oil as of yesterday and was running like a champ. I'm pretty hard on machines but this quad only lasted about 10-12hrs of riding. My other 467 and 478 have done better.
467, Timbo crank/head, CP piston, brand new cams, etc. Gonna start the teardown this week and assess the damage. Beyond frustrated right now. Looking down the plug hole you can see shavings/chunks. Just wonderful.. Spark plug had to be forced out too.
Went riding this morning and coming out of a corner it locked up. Pulled spark plug and oh joy. Major failure. Zero shavings in oil as of yesterday and was running like a champ. I'm pretty hard on machines but this quad only lasted about 10-12hrs of riding. My other 467 and 478 have done better.
467, Timbo crank/head, CP piston, brand new cams, etc. Gonna start the teardown this week and assess the damage. Beyond frustrated right now. Looking down the plug hole you can see shavings/chunks. Just wonderful.. Spark plug had to be forced out too.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Who knows? Gonna pull it tomorrow and see. I did have the air filter off yesterday, though put a rag over everything. The engine is completely seized and won't turn over.
Was running incredible and also was dyno tuned, so doubt it was a tuning issue. I was in 2nd gear near redline and as soon as I shifted to 3rd it just stopped. My other identically setup quad has had the same treatment and well over 50hrs.
Was running incredible and also was dyno tuned, so doubt it was a tuning issue. I was in 2nd gear near redline and as soon as I shifted to 3rd it just stopped. My other identically setup quad has had the same treatment and well over 50hrs.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Engine pulled. Zero shavings/chunks in oil, no coolant mixing and was able to turn the engine over in reverse manually. So the piston still goes up/down but for sure have a bent valve at the minimum. Pulling the covers later. Hoping it was some random fluke but still sucks. Then again, I ride in the upper 20% of the rpm range usually so who knows.