Sounds interesting for the next rering. How can it be 'gapless'?
What kind of racing do you do and how many hours between topends are you going. What is your experience with valve adjustment?
Welcome to the site!
anybody have a Top end kit available?
The "gapless" ring is used in nascar motors, it it basically 2 rings machines together to take place on top compression ring. If you do a leak down test before ring install and after you gain around 12% less blowby. I have sent a couple sets of these to the factory with same results. I race mostly motocross, some harescrambles. #391 250B & +25 class this year in GNC's. I just started racing ATV's this year, I also race a dale X440 in the pro class. I'm going around 10-20 hours between rings, depends on some conditions. I change oil every week, and watch filter carefully. I have also seen some corrosion behind water pump on older heads, new heads have that solved. I work at a dealership, check us out at www.jividenspowerequipment.com
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm