My cutdown HMF
My cutdown HMF
I cut off about 6.5 inches last night and put everything back together. This thing is loud. I do not have to worry about someone hitting my tip anymore though. Was kinda hard to expand the tube to accept the tip again.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Re: My cutdown HMF
QUOTE
Originally posted by Bags
I cut off about 6.5 inches last night and put everything back together. This thing is loud. I do not have to worry about someone hitting my tip anymore though. Was kinda hard to expand the tube to accept the tip again.
I cut off about 6.5 inches last night and put everything back together. This thing is loud. I do not have to worry about someone hitting my tip anymore though. Was kinda hard to expand the tube to accept the tip again.
sorry about the old post....but can you tell me how to do this...ive been thinkin about trying it
I removed my silencer from the quad. Then I removed the four bolts that hold the end cap in place. Then used the rubber hammer to gently tap on the end cap to free it from the can. Then with the end cap removed I used a chop saw to cut off what I didn't want. Next I drilled four holes in the can so I could reinsert the bolts that hold the end cap in place.
Actually pretty easy.
Actually pretty easy.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm