speed ohlins

Message

cannondale27 · #11 Post by **cannondale27** » Fri Mar 05, 2004 12:35 am

Pete that spring setup Jay has will do way more for you than the remote rezzy.As long as you dont mx the valving will be adequite.If you want rezzies check at your local Arctic Cat dealer they will be able to get the hoses and rezzys and put them together for you.

bknight · #12 Post by **bknight** » Fri Mar 05, 2004 12:13 pm

um sorry to step in on this one
jaybr and 27 is the speed and glamis ohlins the same
and the springs that jay has how would that work for me on the sand??

Jaybr · #13 Post by **Jaybr** » Fri Mar 05, 2004 12:57 pm

QUOTE

Originally posted by bknight
um sorry to step in on this one
jaybr and 27 is the speed and glamis ohlins the same
and the springs that jay has how would that work for me on the sand??

The shocks are the same, I think the valving is different.

The springs would fit, but I think their spolen for.

Should be some others around here though, in fact ****** should have a set off his Blaze shocks which are the same.

bknight · #14 Post by **bknight** » Fri Mar 05, 2004 1:14 pm

thank you jay
what im looking for is a softer ride the glamis shocks are to stiff for me on the sand
so what you are saying is that take off the glamis spring and put on the blaze spring.
this is kind of what i was asking about I've got a set up top springs and sleeves to convert them to dual rate too, im lost here

yes i do know you dont have the spings

Jaybr · #15 Post by **Jaybr** » Fri Mar 05, 2004 8:49 pm

No, don't replace with Blaze springs, just add the uppers. The short springs on the Blaze and Moto shocks are softer than the main springs, so they will soften up your first couple inches of travel. And with the main springs being progressive, you won't compress them as much either so you'll get the softer effect all the way through the shocks travel.

bknight · #16 Post by **bknight** » Fri Mar 05, 2004 9:43 pm

ok im not:confused: now got it
pdaivs if you get this all work out let me know how you like it
ill look for sume spings ill need the sleevle to right

Jaybr · #17 Post by **Jaybr** » Fri Mar 05, 2004 10:40 pm

4punks got the other set of sleeves and springs I had and said he liked the setup. Maybe he can get on here and give you guys some feedback.

bknight · #18 Post by **bknight** » Sat Mar 06, 2004 12:25 am

******

yes that will be kool

cannondale27 · #19 Post by **cannondale27** » Sat Mar 06, 2004 7:01 am

I did the same thing to mine.With the sleeve and black spring.I love it.Very soft.I dont jump it much though.

cannondale27 · #20 Post by **cannondale27** » Fri Mar 12, 2004 3:24 am

Bknight wanted some pictures