****** you did get my pm i holp ill still stay with the setup that we where talking about on the front end. would jeff have a softer spring for the rear or haydug
will im going to call jeff for sume help on this on the rear ohlins the numbers are 698-36/105 L 332 the 105 is that lbs pr ins?? jaybr ill pm you later as soon as get a call to jeff
Best mod you can do to the rear shock is cut off the bottom of the bump stop about a 1/4in of it.There is a ridge there cut the stop right there.Helps alot!Then back off the preload.Just make sure there is enough tension to hold spring retainer in with back of quad off ground.
Originally posted by bknight will im going to call jeff for sume help on this on the rear ohlins the numbers are 698-36/105 L 332 the 105 is that lbs pr ins?? jaybr ill pm you later as soon as get a call to jeff
The 105 is the spring rate, but it's in Newton Meters. I found a calculator on the net at one time that would convert that to pounds, I'll have to search for it.
Jaybr ****** cannondale27 haydug thank you so much for the help got the front spings late last night as soon as i get this set up ill let you all know how will it did for the sand