I just receive the D & M kit(thanks Maz), and I would like to update my Hex code. What is the Hex code and why do I need it? I need to know how to install it? I did not see a place to send it with the D & M kit. Thanks
Here are the stock settings.
02 SPEED
TPS C-0.26
TPS O-4.30
TBL-0.0 WHAT IS THIS?
FIFR-2450 ???
IO-1.00 IS THIS HIGH?
Loading HEX code
I have never done the hex code... sorry..
I can comment on your settings though.
Lower TPS - closed throttle position
Higher TPS - open throttle position
TBL - Throttle body leakage - 0 is normal.
2450 is your Flowrate.
1.00 - this is your injector offset.
Numbers all look good. If it is a little rich on the bottom, take that 1.00 offset down to a .95 and try it there. Flowrate number is good as long as it is running well.
I'm sure someone else can help with the hex.
I can comment on your settings though.
Lower TPS - closed throttle position
Higher TPS - open throttle position
TBL - Throttle body leakage - 0 is normal.
2450 is your Flowrate.
1.00 - this is your injector offset.
Numbers all look good. If it is a little rich on the bottom, take that 1.00 offset down to a .95 and try it there. Flowrate number is good as long as it is running well.
I'm sure someone else can help with the hex.