Good RWHP numbers
What AFR were you shooting for? I would think you would have been able to get it dialed in with the tool... kinda stinks if you can't. I don't know what you would do to keep it from running lean then?
Anyone ever drag raced their Dale??
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
GOOD RESULTS Dude .. 42 H.P with stock exhaust is excellent result .. with 79 MPH that's very nice also . its rare to see stock dale with that results in both H.P's and MPH
... r u at sea level ?
so what is ur next step Dragracr ....ECU sagem 1000 , pipe , port the head,new 5th gear set or re-angle the injectors ?
do u try to re-gear it ? maybe u can get better timing by buying cheap sprockets ?
... r u at sea level ?
so what is ur next step Dragracr ....ECU sagem 1000 , pipe , port the head,new 5th gear set or re-angle the injectors ?
do u try to re-gear it ? maybe u can get better timing by buying cheap sprockets ?
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
QUOTE
Originally posted by NRath
Isn't there a screw on the MC500 ecu's that'll richen/lean it as you turn it?
Isn't there a screw on the MC500 ecu's that'll richen/lean it as you turn it?
That's right, at the front of 500ECU there is an inset plastic screw that will richen/lean the mix across the entire rev range.
Take a look at that Dragrcr. right is richer, left, leaner. In my limited experience, a little turn goes a long way. I guess i was thinking you had used that already.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
put away the tools Derno
we all know you are just tryin to help. LOL.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
right Derno24
call Kyle from reperformance at 812-279-5833 . i remeber he can update ur sagem from 500 to sagem1000. that's will be cheaper... i belive Maz from www.cdalparts.com, http://www.sprocketspecialists.com/html/ca...annondale.shtml and i guess www.rockymountainatv.com have sprockets
call Kyle from reperformance at 812-279-5833 . i remeber he can update ur sagem from 500 to sagem1000. that's will be cheaper... i belive Maz from www.cdalparts.com, http://www.sprocketspecialists.com/html/ca...annondale.shtml and i guess www.rockymountainatv.com have sprockets