QUOTE
Originally posted by garysol1
do the pins unplug easy enough so you can plug your D&M kit in or is it a pain? I wonder if I should not hard wire mine in so the plug is left open for the D&M.
(quote)
With the right pins it works out awsome. All you do is pull them small rubber nubs from the original socket (you don't even have to remove it). The shove the new pins with wires attached in the holes until they 'click' and lock in place. The rubber seals tight around each wire.
Notice that the pins go through the top of the seal cap. The little nubs just pull out and you replace them with the pins. When you want to hook up the D&M kit you simply remove the cap as always and plug it in.
![](http://infernomxracing.com/images/pins.jpg)