computer
Or better than the toggle, just put in a relay hooked to the key switch, when the switch is on throw the relay and send the ground to the fuel pump. You can even put the relay in the ECU tray to keep it nice and dry. Thats all the ECU is doing any way, just a complicated relay that throws a ground line to the fuel pump.
Speaking of which, are you sure its the ECU that has the problem? If your ground wire is shorting out then your pump will go all the time. The hot is always hot and the ground is relayed through the ECU.
Speaking of which, are you sure its the ECU that has the problem? If your ground wire is shorting out then your pump will go all the time. The hot is always hot and the ground is relayed through the ECU.
It is the ecu
Well, we are pretty positive that it is the ecu as the problem doesn't exist when my brother puts his in my bike. I did kindof wonder because this started right after we put the engine back in, we had it out for a cracked sleeve. I was thinking about a switch but my brother already ordered a new ecu from Randy Abbott which should be here soon programmed and ready for my bike. After having had the sleeve crack down at the Little Sahara it feels great to be back on the rear two wheels again!!! Thanks for the suggestions.