sprockets
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
sprockets
Im looking for 14/40 sprockets. I heard the front is a KTM 400, is this true? If so does year matter? And is the rear the same as a 400ex? Thanks for the help.
The KTM sprocket will work yes, but there is a slight difference. I had mine machined off after loosing the nut. The sprocket is a little thicker and the retaining ring just barely fits on the shaft splines. Be careful when tightening and you shouldn't have a problem. I rode for 6 months with no problem, then let someone borrow my sprocket nut for a race and when he put it back on, it came off on me the next ride.
Rear sprocket is the same as the Honda yes.
Rear sprocket is the same as the Honda yes.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
QUOTE
Originally posted by housercdale
I bought a rear sprocket for a honda and the allens dont set in far enough to clear the swing-arm bearing carrier. Anyone had this problem?
I bought a rear sprocket for a honda and the allens dont set in far enough to clear the swing-arm bearing carrier. Anyone had this problem?
flip the sprocket around, you have the nuts and bolts on wrong sides..i did the same thing:o or also when my bearing carrier was shot my sprocket went over a little bit and rubbed against the swingarm..could also be your cause..ive used 250R/400ex rear sprockets the entire time on my quad..and i have 3 different rear combo's..