Engine, intake, exhaust, EFI, chain, sprockets, etc.
kdeal
Posts: 4 Joined: Wed Mar 10, 2021 10:41 pm
#2
Post
by kdeal » Sun Jul 04, 2004 12:06 am
That would be 25hp.......(wink, wink).
I believe the stock motor at the crankshaft was "rated" @ 42hp. At the rear wheels would be less of course. Cannondale27 probably can tell you down to the 1/10th of a HP....
thomez
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#3
Post
by thomez » Sun Jul 04, 2004 12:18 am
More than any other stock machine
Idahocannibal
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#4
Post
by Idahocannibal » Sun Jul 04, 2004 12:37 am
A Cannondale brochure that I have say the cannibal and speed are 33 rwhp and the blaze and moto are 39.
haydug
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#6
Post
by haydug » Sun Jul 04, 2004 3:52 am
I ran a new blaze and got 39-40 h.p. out of it, and with a ported head reached 46 h.p. This was on GT Thunder's dyno, and before 450 kits. I also wasn't at all familier with mapping at the time, so it was a moto map.
cannondale27
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#7
Post
by cannondale27 » Sun Jul 04, 2004 4:33 am
I got 42 with 450 and reangled injectors.There were some issues though.I hope to get back on dyno as soon as I get that one back together.
iceracer17
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#8
Post
by iceracer17 » Mon Jul 05, 2004 12:08 am
I got 41.5 with slipon muffler and my own airbox mod on a stock early 02' with the good piston.
Sandstorm
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#9
Post
by Sandstorm » Mon Jul 05, 2004 2:41 am
Are you guys useing knobbies or ????
cannondale27
Posts: 0 Joined: Wed Mar 10, 2021 10:41 pm
#10
Post
by cannondale27 » Mon Jul 05, 2004 3:37 am
Iceracer and I both used American Racers.Knobbies=less HP