i need help
when i put my winky crank in i put ball bearings on both ends, i took out roller bearings, i did not and have not had any problems yet, two nationals, several district races and still running great. I got these bearings with the crank, i like it because it eliminates all of the end play, which i think had something to do with the failures.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
QUOTE
Originally posted by cannondale27
Something weird here.I agree with Haydug the ballbearings will not fit on a stock crank.There is even a inner race from stock bearings pressed on and dia is to big.Got a part number for this ballbearing maybe its different than all the rest?
Something weird here.I agree with Haydug the ballbearings will not fit on a stock crank.There is even a inner race from stock bearings pressed on and dia is to big.Got a part number for this ballbearing maybe its different than all the rest?
part number for stator side bearing is 6205.j30
i dont have the other number
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Plummer1111 before you put the 6205 bearing on how did you remove the inner race from the crank?I wonder if you had one of those Cleaned stock cranks I saw.It may have been turned down for the 6205 already and if used with a stock bearing that would easily wreck a stock bearing.Did it have H-beam rod on it with thrust washers along with rpm rating printed on it?If not it is just a cheaper version of a Winky crank.
I also used ballbearings same part number.Crank failed but the main bearings were fine.
I also used ballbearings same part number.Crank failed but the main bearings were fine.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm