Pingel kill switch install
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Checked out my wiring, cut into one of the factory on/off wires just below the front plastic level. Then I went to Rat shack and they were helpless, no bullet type connectors or even a clue as to what they are. I picked up some terminal push together type end and soldered them together, taped, heat shrunk, then taped again, tucked under the front plastic!
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm