Nerf Bar Nets
Nerf Bar Nets
Any interest in new nerf bar nets for the factory bars?
I found a place that will make them, I'll be using 1" heavy nylon straps. There is an initial prototype/setup charge, so 1 set is not cost effective.
Standard colors would be Royal Blue, Firetruck Red, Black, Green, Burgandy, Grape, and Mustard Yellow. I think I can get custom colors, but not sure of the cost.
I could also do them in Polypropylen, which is cheaper and easier to clean and available in a few more colors.
I found a place that will make them, I'll be using 1" heavy nylon straps. There is an initial prototype/setup charge, so 1 set is not cost effective.
Standard colors would be Royal Blue, Firetruck Red, Black, Green, Burgandy, Grape, and Mustard Yellow. I think I can get custom colors, but not sure of the cost.
I could also do them in Polypropylen, which is cheaper and easier to clean and available in a few more colors.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Graydon
No, cannondale didn't make the nerfs for their bikes.
Graydon made them, and you should see if you can get nets from them, I know the person I bought my cannibal from bought the nerfs from them.
Graydon made them, and you should see if you can get nets from them, I know the person I bought my cannibal from bought the nerfs from them.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
sure about that man? cos graydon's NON propeg ones are very short, and actually end halfway down the engine cradle, and the propegs are XFACTOR ones, or Advantage Performance ones, Gibson ETC, all the same, and tehy hook into the frame similary to the stock ones, but are not like the stock ones at all, the pegs are larger, they are thicker material used, and are overall a much better nerf..
Jay i'd be interested in a set, preferrably BLACK
Jay i'd be interested in a set, preferrably BLACK
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm