Electrical guru's please help
Electrical guru's please help
ok electrical guru's. i have posted a couple different times with different issues and it is one after another. here is what i know. i have the revision 8 harness. i put in a new coil and now runs fine but won't shut off. the relay tests fine. i took off the cover to watch the relay work and it works fine by closing any completeing the circuit. but i can turn the key off and turn off the kill switch and nothing happens. i can even pull the connections apart all of them for the ignition and kill switch and even pull the relay and still nothing. there are no other electrical add on's on the bike at this time. i took the status light off and tether kill off as well to try to pin point it. i have to kill it by either stalling it or putting my hand over the intake or pulling the fuse. but even after stalling the quad with the key on the off postion and the kill switch off the relay will stay closed circuit ever after the two minutes that it is suppost to stay on for fan purposes for only two minutes. so it seems to still be getting power. i pull the fuse and the relay will open. all connections are connected. the ignition seems to work fine when you turn the quad on. i can put the fuse back in with the key off and and the kill switch off and nothing powers up. i turn on the key and nothing turns on like it sould; until i turn on the kill switch then the fuel pump will prime and then i can start it. i guess the only problem is that once started or key is turn to the on postion and power is powered up it will not stut down or power down. if anyone has anything to help. please help.
you can also call me as well @623-680-1086 my name is Kyle
this thing has been a pain it the butt. and i thank all that has been trying to help but still no luck
you can also call me as well @623-680-1086 my name is Kyle
this thing has been a pain it the butt. and i thank all that has been trying to help but still no luck
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Get a PM off to DangerRanger. He's an electrical engineer and knows these systems better than anyone. He has a harness upgrade that is sold through my website www.blackwidowatv.com. He can tell you if it will fix your problem or not
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
yeah all of the connections are good. i think it might be a diode but i don't know which one. i have the revision 8 harness so there is only 3 diode's i think; but i have to find which and where they are. replacing it souldn't be a problem but i wounldn't mind getting a new harness as well. i just have to fix before my next riding trip next week.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm