not as good as i thought (drag racing)
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
not as good as i thought (drag racing)
I had the post earlyer about me draging the 450s, well i havnt got to race them yet, so earlyer today i went riding with a kfx 400 and a modded raptor, it has some carb work done, full yoshi, air box, k and n and i think thats it, well we raced, he got me bad off the hole and i finaly caught him and beat him by about 1 1/2 bikes, i also hit the rev limiter in every gear but forth, should i beat hime worse, and how do i work on a hole shot, i thought i was half way decent, but i guess not, also i have a 2mm stroker crank, 450 kit, reangled injectors, and some head work, so just kinda lookin for some pointers and if you guys think i should have beet him worse or what, i really need to work on my shifting and my launching!! thanks guys, ill keep ya posted on the progress!
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
One trick for clutch performance.....Line up.......rev the motor and slowly let the clutch out. You will feel it start to grab hold it there. As long as the quad is not moving. This way when you go there is no delay to the launch. The other thing higher gear starts require more revs than 1st gear starts.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm