yeah i would rather glue them on I am not wild about the way the safety wire look and the chances of it breaking and coming off. luckily I have some 3m weatherstrip adhesive I hace to glue my ecu tray seal back on it was coming loose
Originally posted by cannondale27 Razor for getting them off and air for putting them on.
Ditto. Make sure you clean your bars real good with brake cleaner and scrape any old glue off before installing the new grips. Also, if your bars don't have the knurled ends, ruff them up with some coarse sand papper.
so put the adhesive of the bars and then use the air to expand the grip and install them. I am going to get Tag T2 bars so I am sure they have knurled ends
Put the glue on the bars and in the grip. You should be able to slide it on without air. Work quickly as the glue dries pretty quick. Bars will only be knurled on one end, they won't knurl the throttle side since some people use twist throttles.
I love spider grips, and use Brakecleaner, i promsie you guys man its the best.. it evaporates so quicky its like not putting anything on ur grip at all, just enough so it gets on there!