10k rev limit
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
We dyno'd so much that we actually had a "dyno wheel" that we used. It would normally be someones leftover tire from a new purchase and a spare shop rim. Those dyno's eat some tires up! We used to be able to dyno all day long on Sunday's at no cost. Too bad that dyno isn't capable of doing 4 wheelers or I would have a major hook up.:wow
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Just thought I'd bring this post back to life. My falicon motor is back running now and has the updated valve springs. Ran it for 3 days at Glamis with no problems at all. I've hardly put enough hours on this motor to call the new springs a total sucess, but they are working well none the less and I thought I'd report.
The springs are custom made and are 1mm longer and a few pounds stiffer (43psi I beleive was the weight, but could have been 45)
I'll keep you guys posted as I put more time on the motor.
The springs are custom made and are 1mm longer and a few pounds stiffer (43psi I beleive was the weight, but could have been 45)
I'll keep you guys posted as I put more time on the motor.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm