Velocity stack cut down....
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Velocity stack cut down....
Has anyone tried to cut the velocity stack that is located in the air box. I was thinking of cutting mine down to about 2 inches and wanted to hear what you guys had to say......Maybe a secret to a few more ponies:drink: ????? Thanks
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
That curve reduces turbulence as the air is drawn in from the sides of the air horn. Do not cut it off. Get the shorter one or leave it alone. You will loose airflow. If you want to go el cheapo you could try taking some out of the middle and reattaching the horn at the top but that might be risky as it might come loose while running.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
what about the insert that is pressed in the throttle body? if you were to cut the rubber clamp to fit the size of the throttle body without the insert and potlish the lip of were the insert existed ....correct me if i am wrong but this would speed up the air just before the injectors ... could this mix the fuel as well as give you more air? I was working on something like this but it included removing the air box
also does any one have a good way of the putting air box temp senser in a good spot when the air box is removed? also, what is the other tube for ...
thanks
also does any one have a good way of the putting air box temp senser in a good spot when the air box is removed? also, what is the other tube for ...
thanks