Kill Switch Needed- Going TO Glen Helen
Kill Switch Needed- Going TO Glen Helen
Just got my 2005 ATK MX450 today, and it did not come with a kill switch, I am leaving for Glen Helen for the quad national tomarrow, is any body coming there that has a Pingel switch. Let me know or i will try and make something work when i get out there. Also are these easy to wire in or no.
What to look for.
2004 GMC 2500 extended cab-Grey with a 22 ft enclosed grey haulmark race trailer. Trailer has awning, aluminum rims. 2003 moto with 250r conversion, 2005 Mx 450, Polaris predator-red, and a yellow 400ex will all be at the trailer. Also i could pm my cell number to you. Let me know I will have access to the internet almost the whole trip, we could also set up a time to meet at a specfic spot at the track. I will also be stopping by AC Racing in Anahiem on either tuesday or wednesday. I don't know how far they are from you though.
Ok
Are you talking about next weeks race? On the 5th and 6th.
I can take it out and meet you there. No major problem. A Cell number would be good.
In the mean time look for two wires that are Purple on your existing harness. They should be down around the Bundle that is zip tied under your ecu tray. When you find them they should have a male and female bullet connector. The Pringle plugs right in. You also need the mount, I don't know if the ATK are being made with them.
I live in Anaheim and work about 1/2 - 1 mile from AC so if that's better for you let me know.
Smitty
I can take it out and meet you there. No major problem. A Cell number would be good.
In the mean time look for two wires that are Purple on your existing harness. They should be down around the Bundle that is zip tied under your ecu tray. When you find them they should have a male and female bullet connector. The Pringle plugs right in. You also need the mount, I don't know if the ATK are being made with them.
I live in Anaheim and work about 1/2 - 1 mile from AC so if that's better for you let me know.
Smitty