Wont stay running! plz help.
Wont stay running! plz help.
cannondale cannible... well yesterday i went riding for a while and it ran awsome. well later towards the night i went to a party and shut the bike off and ocassionally startted it up to take a ride. Well after a while it got harder to start. Well the last time i went to start it when everyone was leaving it took about 5 min to start. and i figured it wasnt warmed up enough so i didnt think anything of it. well i pulled out and started driving and it shut off. so i started it back up and from then on i had to keep it at a high rpm or it shuts off.
so i started taking it home and it kept doing the same thing by shutting off at low rpm. Well about the 4th time of shutting off i tried starting it and it wouldnt start. just kept cranking. one time it shot a flame from the exhaust and popped. then it started and i took it home but really had to keep it reving for it to run.
What can be the problem? i dont got a d&m kit either.
so i started taking it home and it kept doing the same thing by shutting off at low rpm. Well about the 4th time of shutting off i tried starting it and it wouldnt start. just kept cranking. one time it shot a flame from the exhaust and popped. then it started and i took it home but really had to keep it reving for it to run.
What can be the problem? i dont got a d&m kit either.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Re: .
QUOTE
Originally posted by exracer12
im going to change oil, tranny fluid, spark plug, fuel filter today. what all do i need to change all of this. i have all the tools but dont know the materials i need? onlt thing i have now is the oil filter.
im going to change oil, tranny fluid, spark plug, fuel filter today. what all do i need to change all of this. i have all the tools but dont know the materials i need? onlt thing i have now is the oil filter.
The only other thing you need is a new fuel filter. You can get one at Napa Autoparts. Napa Gold 3011 fuel filter.
Download the owners manual . Its all in there. Its vital the tranny filter be installed straight in and the plug turns in easily. If it doesnt it will bend the filter and the tranny will eat it. You can chamfer the end of the tranny plug with a large drill bit to make the filter line up easier. An do not under any circumstances use a 12 point socket or wrench on the drain plugs. They are soft metal and will strip the hex head after the first or second time you do it.
Fill quads with 1.5 quarts of oil.
Fill quads with 1.5 quarts of oil.