rpm axle help
http://www.msnusers.com/cannondale112/shoebox.msnw
heres my web alblum of cannondale pics if you want to see the pictures in more detail. thanks for all the help
heres my web alblum of cannondale pics if you want to see the pictures in more detail. thanks for all the help
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
wait, did you put the snap ring on AFTER you put the lock nut on? because it won't go past there.
First do this. Put the threaded piece into the lock nut. Slide it all the way on to the carrier hub. Slide the snap ring on. now, turn the lock nut OUTWARDS until the threaded piece unthreads from inside the locknut, thus pressing itself against the brake hub. This keeps it tight. hand tighten the lock nut off, then give it a few twists with the tool provided. if this doens't work PM me ill help you out better, i have had a lot of problems before with this crap, got some pics from before too..
First do this. Put the threaded piece into the lock nut. Slide it all the way on to the carrier hub. Slide the snap ring on. now, turn the lock nut OUTWARDS until the threaded piece unthreads from inside the locknut, thus pressing itself against the brake hub. This keeps it tight. hand tighten the lock nut off, then give it a few twists with the tool provided. if this doens't work PM me ill help you out better, i have had a lot of problems before with this crap, got some pics from before too..
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm