Speed With Moto Pipe - What File Do I Use?
Speed With Moto Pipe - What File Do I Use?
With the D&M Kit, what hex file should I use if I have upgraded my Speed to a MOTO pipe? I like the Speed map and would prefer not to change it to the MOTO map. Lastly, did the Blaze come spec'd with a titanium pipe as well as the Moto?
I don't think you need to change hex codes as long as you have the most recent one. You're probably lean if you are running a speed map with the blaze/moto exhaust. I'd at least try your best to tune it and run good gas. With that exhaust you don't need the extra timing the speed map has. Yes, the Blaze and Moto had the same Titanium exhaust.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
2603 on the flow using a Moto pipe with a Speed map has to be very lean. You shouldn't use the Speed map unless your using the toaster exhaust. The 2603 is lean even with the right map for most of us. I'd recheck your stock settings using the excel files on this site. I'm wondering if your settings aren't stock and need to be reset.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm