Supporting our Cannondale covergirl
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Iceracers old FX is the highest I could find with airbox/stock stroke/piston.Hazmats is highest with same combo and porting with no airbox I believe.I threw mine in there since I think it is highest with MC1000 and Asso low comp piston,stock other than Big Gun.Iceracer is blue.Hazmat is red.I am green.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
I have been planning on doing the texas national...but Im not sure... my quad isnt even close to being together yet and the time is ticking away very quickly. It really depends on how fast my stuff (motor, suspension, tires, a arms and various other parts) gets here..... Im going to keep my fingers crossed.
I have a job interview today so if all goes well I will try to carpool to a couple more nationals this year. Not sure which ones yet tho, I will let ya'll know what happens.
I have a job interview today so if all goes well I will try to carpool to a couple more nationals this year. Not sure which ones yet tho, I will let ya'll know what happens.
Well things didnt work out yesterday. Mikes cycle couldnt get me in so I went to Rossier Engineering's dyno. Turns out the quad wouldnt fit on his dyno because its made for cars and the rollers were farther apart than the stock dale axle with 4 /4 offset dyno wheels.
So it looks like it will be monday before getting the motor tuned.
It was cool getting to talk to Rossier . I found out he built the crf engine that we have been trying to out dyno for the last year.
Another can of worms was opened up when we started talking about his exhaust systems. He wont R&D any exhaust for Cannondales unless he gets a minimum order of 100. He is dropping the Raptor 700 systems because of this also. So instead he gave me some ideas for quick prototyping a high flow exhaust for the extreme Cannondale motors.
I have enough donation money for 2 hours of dyno time. After Karas motor is tuned 4 stock airbox velocity stacks and 2 throttle bodies will be tested for performance results time permitting.
And Kara a secret admirer has sent you a little personalized bling.
On the condition that you polish the quads frame to match it. It sickening.
So it looks like it will be monday before getting the motor tuned.
It was cool getting to talk to Rossier . I found out he built the crf engine that we have been trying to out dyno for the last year.
Another can of worms was opened up when we started talking about his exhaust systems. He wont R&D any exhaust for Cannondales unless he gets a minimum order of 100. He is dropping the Raptor 700 systems because of this also. So instead he gave me some ideas for quick prototyping a high flow exhaust for the extreme Cannondale motors.
I have enough donation money for 2 hours of dyno time. After Karas motor is tuned 4 stock airbox velocity stacks and 2 throttle bodies will be tested for performance results time permitting.
And Kara a secret admirer has sent you a little personalized bling.
On the condition that you polish the quads frame to match it. It sickening.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm