Best airfilter upgrade.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
I would go with the standard sized cyclone or Boomer's setup for standard intake. You don't need Harley injectors for this setup. My setup is a 450 (CP with stock stroke) and I don't need Harley injectors, and the bikes with the low end hole in the power band are 432cc with no porting, so Harley injectors are not required.
Read my post again, a simple open air filter conversion with a protective flap will get you A LOT of hp!!
Read my post again, a simple open air filter conversion with a protective flap will get you A LOT of hp!!
I used a velocity stack from a Keihin carb, 42mm ID. On that I installed a K&N powerfilter and over that I can install the stock airfilter and use a zip-tie to make sure it seals correctly.
Realy big difference vs the stock airbox setup.
Don't worry about the tempsensor in the pic, it's not there anymore.
Realy big difference vs the stock airbox setup.
Don't worry about the tempsensor in the pic, it's not there anymore.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
QUOTE (thedeatons @ Feb 15 2008, 06:41 PM) <{POST_SNAPBACK}>
Cyclone doesn't include filter....
Boomer will give you whatever filter you want... You pick, foam or gauze.
Boomer will give you whatever filter you want... You pick, foam or gauze.
I believe Tim does offer a filter?