how does atk decide on there prices?
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
I've had some trouble with my cap also. Under pressure the cap would "spread" and come loose letting coolant out. I fixed it by putting two wraps of safety wire around the cap where the threads are. I used a soldering iron to make two grooves around the circumfrence. Those keep the iwre in place. Then I put some safety wire in the grooves.
This procedure was recommended to me by a former cannondale R&D employee.
This procedure was recommended to me by a former cannondale R&D employee.