Does anyone have any knowledge of a company that makes a riser clamp set that works with 1 1/8" clamps on both ends?? I already have a Houser stem with fat bar clamps but would like higher bars w/o having to buy a new stem or getting mine lengthened. Any help would be appreciated!
Jordan
Handlebar Risers
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
There a company called Rox that make pivoting risers ($75.00) and anti-vibration risers ($150.00) for oversize bars. their web sites are
Pivot Riser-
http://www.roxspeedfx.com/cgi-bin/cart/sho...i?subcat_id=256
Anti-vib-
http://www.roxspeedfx.com/cgi-bin/cart/sho...i?subcat_id=254
Pivot Riser-
http://www.roxspeedfx.com/cgi-bin/cart/sho...i?subcat_id=256
Anti-vib-
http://www.roxspeedfx.com/cgi-bin/cart/sho...i?subcat_id=254
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
The Rox Risers are sure nice for that front/back adjustment.
But if you want a straight rise, in line with the stem, I can get you a Trail Tech setup with a one-piece polished dogbone, $63.75.
The vertical rise is about 2 inches (I'll have to verify) and it replaces your stock clamps from the stem upward.
pacrimdm@msn.com for more info.
Thanks, Dave
But if you want a straight rise, in line with the stem, I can get you a Trail Tech setup with a one-piece polished dogbone, $63.75.
The vertical rise is about 2 inches (I'll have to verify) and it replaces your stock clamps from the stem upward.
pacrimdm@msn.com for more info.
Thanks, Dave
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm