Parting out the Moto
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
If you see stuff you want, make an offer. I am not trying to make a killing. Just make what you think is a reasonable offer. If your offer is nuts I may not have time to respond. I will consider all reasonable offers. Parting out our moto. First one to pay gets it unless you commit to buy. Everything must go. Email jmridenour1@netzero.com. If you buy enough stuff we will discount prices for you. We have a goal to reach and want to get there fast. I'll sell all the rest of this stuff for $1000 if you pick it up.
Unicorn Case $300
Stator - almost new $70
Flywheel - almost new $60
Rebuilt Crank w/z400 bearing - $250
Intake Cam - $50
Moto Hubs - fronts $35 each
Throttle $20
Radiator $30
PC Carbon Fiber Radiator Shrouds $60
Almost new fuel pump $75
ATV shifter like new $15
Motorcycle shifter $10
Silver front, side and rear plastic - race cut $70
Red front and rear plastic - $25
New Red Deletes $30
2 seats - need covers, foam good $20 each
Swingarm $110
2 gas tanks $15 each
Airbox with short horn $20
Grab bar $10
Sub frame $60
Did X-Ring ATV Chain 0 hours $50
Moose Hardened Aluminum 38T Rear Sprocket 0 Hours $40
Throttle Body with injectors $65
Fan $5
2 OMF 3-2 offset 190 beadlocks for Yamaha $150
2 OMF 10x8 5-3 offset 190 beadlocks for Yamaha $150
Engine cradle $60
Used Crankshaft probably needs rebuild $75
Rear Moto Ohlins - Make offer
Let me know what you want and make an offer!!!
Pic for exhaust header is on here. $50
If we are asking too much make an offer but nothing too silly. Email me for a faster answer. Prices do not include shipping. I will combine items to get the best shipping price I can. I take Paypal. Email me at jmridenour1@netzero.com.
Unicorn Case $300
Stator - almost new $70
Flywheel - almost new $60
Rebuilt Crank w/z400 bearing - $250
Intake Cam - $50
Moto Hubs - fronts $35 each
Throttle $20
Radiator $30
PC Carbon Fiber Radiator Shrouds $60
Almost new fuel pump $75
ATV shifter like new $15
Motorcycle shifter $10
Silver front, side and rear plastic - race cut $70
Red front and rear plastic - $25
New Red Deletes $30
2 seats - need covers, foam good $20 each
Swingarm $110
2 gas tanks $15 each
Airbox with short horn $20
Grab bar $10
Sub frame $60
Did X-Ring ATV Chain 0 hours $50
Moose Hardened Aluminum 38T Rear Sprocket 0 Hours $40
Throttle Body with injectors $65
Fan $5
2 OMF 3-2 offset 190 beadlocks for Yamaha $150
2 OMF 10x8 5-3 offset 190 beadlocks for Yamaha $150
Engine cradle $60
Used Crankshaft probably needs rebuild $75
Rear Moto Ohlins - Make offer
Let me know what you want and make an offer!!!
Pic for exhaust header is on here. $50
If we are asking too much make an offer but nothing too silly. Email me for a faster answer. Prices do not include shipping. I will combine items to get the best shipping price I can. I take Paypal. Email me at jmridenour1@netzero.com.
Ok, hopefully Im quick enough for dibs here LOL.
I want the killswitch and the handlebars for sure. T2's are fat bars right? Do you have the clamps to go with them also?
Why do you have Yamaha OMF beadlocks? They wont work on stock Cannondale hubs will they?
Also, I want the front sprocket also.
I want the killswitch and the handlebars for sure. T2's are fat bars right? Do you have the clamps to go with them also?
Why do you have Yamaha OMF beadlocks? They wont work on stock Cannondale hubs will they?
QUOTE (yamadjs08 @ May 3 2006, 08:51 PM) <{POST_SNAPBACK}>
Ok, hopefully Im quick enough for dibs here LOL.
I want the killswitch and the handlebars for sure. T2's are fat bars right? Do you have the clamps to go with them also?
Why do you have Yamaha OMF beadlocks? They wont work on stock Cannondale hubs will they?
I want the killswitch and the handlebars for sure. T2's are fat bars right? Do you have the clamps to go with them also?
Why do you have Yamaha OMF beadlocks? They wont work on stock Cannondale hubs will they?
Also, I want the front sprocket also.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
QUOTE (yamadjs08 @ May 4 2006, 01:56 AM) <{POST_SNAPBACK}>
Ok, hopefully Im quick enough for dibs here LOL.
I want the killswitch and the handlebars for sure. T2's are fat bars right? Do you have the clamps to go with them also?
Why do you have Yamaha OMF beadlocks? They wont work on stock Cannondale hubs will they?
Also, I want the front sprocket also.
I want the killswitch and the handlebars for sure. T2's are fat bars right? Do you have the clamps to go with them also?
Why do you have Yamaha OMF beadlocks? They wont work on stock Cannondale hubs will they?
Also, I want the front sprocket also.
T2's are fat. Got the clamps also. I have to talk to Joe about how much he wants for them. PM me your zip and I will give you a total with shipping.
We have the Yamaha beads from a Banshee. They were sitting here so we listed them too.
Mike
QUOTE (fixthedale @ May 3 2006, 09:03 PM) <{POST_SNAPBACK}>
T2's are fat. Got the clamps also. I have to talk to Joe about how much he wants for them. PM me your zip and I will give you a total with shipping.
We have the Yamaha beads from a Banshee. They were sitting here so we listed them too.
Mike
We have the Yamaha beads from a Banshee. They were sitting here so we listed them too.
Mike
Alright cool, so I want the T2's, the clamps, the killswitch, and the 14 tooth front sprocket. Give me a total for shipping and your paypal address.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
QUOTE (jesshamner @ May 4 2006, 02:05 PM) <{POST_SNAPBACK}>
Location? Can I get pics of the plastic?
We are north of St. Louis, MO and will hopefully be posting some pics this evening!
Thanks,
Mike