What happens when you put LT shocks on Standard Arms?
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
If your long travel shocks are Ohlins shocks, you can use the spacers to limit the travel. You will also have to use a shorter spring to go with that setup, or just one stage of the Moto Ohlins setup. The other option you can use is used on monster trucks all the time so I would think it would work here as well. What you need is a 1 inch wide strap, cut it and stitch a buckle or loop on each end. The key to the strap is a 16 inch length when done. You can then install the strap and limit the shock from traveling all the way out. This will work I have done it, but you must use a heavy duty strap and have someone who can stitch a very strong stitch. Keep in mind, these are just ideas you can try. I have used a strap on my shocks with great success, but the risk is your own. If the strap breaks it WILL break the ball joint.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm