clutch cable

Message

383astro · #1 Post by **383astro** » Mon Oct 23, 2006 9:10 pm

any clutch cables fit easily off of other bikes? thanks

mydreamride · #2 Post by **mydreamride** » Mon Oct 23, 2006 9:20 pm

As of right now I'm running a blaster 200 clutch cable and with very little mods is needed to get to fit.

383astro · #3 Post by **383astro** » Mon Oct 23, 2006 9:31 pm

what mods?

cannondale27 · #4 Post by **cannondale27** » Tue Oct 24, 2006 12:09 am

I also heard 300 Foreman.I put my old dale clutch cable on a 400 ex so should work other way around also.

mydreamride · #5 Post by **mydreamride** » Tue Oct 24, 2006 1:09 am

At the end of the cable that attaches to actuating arm there is like an adaptor molded arounded the cable that that should be loose. You have to take an a die grinder to cut a slot in the adaptor to remove it and us that same adaptor to use on the blaster cable, then just grind the slot on the actuating arm so it slips right in. If you don't uderstand this I can take a picture of what I looks like finished.

383astro · #6 Post by **383astro** » Tue Oct 24, 2006 5:57 am

I understand but a pic would be great too. Thanks