New Here
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Alright well some of you may know gml1998, well I'm his son. You may remember the topic of me wanting a YFZ at some point, but that has changed. You may or may not know that my dad has a Cannibal and a Speed. Well he offered me the Cannibal once its done getting all the work done to it (at this point may be fall by the time that comes.) Well I figured I'd be great full for what I have and see what I can do with the Cannibal. I'd like to set it up for a little motocross. So I ask you guys what I should do to it to make it a little race worthy. It already has bars and a pipe. I know I need a tether kill switch, nerfs and numbers but what else just to give it a little more race, lol. Thanks a lot in advance
-Chad
-Chad
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
I suggest this setup:
The exact same as a Cannondale Moto...
Front
Long travel front shocks.
Long travel +2 A-arms (equalling +4" total on the front end)
+2 tie rods to go with the wider A-arms
Adjustable steering stabilizer (a great assistant on the track, reduces fatigue)
Rear
Adjustable axle 0 to +4"
Other
Moto nerf bars (true through the frame nerfs, designed and made by Cannondale... Still no one else doing it this way)
Moto/Blaze key plate
Pingel kill switch with tether (mounts in the Moto key plate!)
Moto/Blaze front & rear number plate
The Moto is setup up extremely well. I raced mine a couple times and it did awesome, I failed long before it did. The long travel Ohlins are like riding on clouds.
There are many other brands to choose from, but I personally like going with what Cannondale originally spec'd, just to be original. Cannondale did the suspension right. I have yet to see a stronger A-arm than the Moto a-arm. ASRs fail quickly and some of the off brands are just as bad. Your rear shock is just fine, they are simply valved differently. A gripper seat is an option too...
You are starting with an awesome platform. You can totally Moto-convert a Cannibal for about $2000 if you buy everything nearly new. Once you do that you will wonder why you didn't do it sooner.
The exact same as a Cannondale Moto...
Front
Long travel front shocks.
Long travel +2 A-arms (equalling +4" total on the front end)
+2 tie rods to go with the wider A-arms
Adjustable steering stabilizer (a great assistant on the track, reduces fatigue)
Rear
Adjustable axle 0 to +4"
Other
Moto nerf bars (true through the frame nerfs, designed and made by Cannondale... Still no one else doing it this way)
Moto/Blaze key plate
Pingel kill switch with tether (mounts in the Moto key plate!)
Moto/Blaze front & rear number plate
The Moto is setup up extremely well. I raced mine a couple times and it did awesome, I failed long before it did. The long travel Ohlins are like riding on clouds.
There are many other brands to choose from, but I personally like going with what Cannondale originally spec'd, just to be original. Cannondale did the suspension right. I have yet to see a stronger A-arm than the Moto a-arm. ASRs fail quickly and some of the off brands are just as bad. Your rear shock is just fine, they are simply valved differently. A gripper seat is an option too...
You are starting with an awesome platform. You can totally Moto-convert a Cannibal for about $2000 if you buy everything nearly new. Once you do that you will wonder why you didn't do it sooner.
QUOTE
Other Moto nerf bars (true through the frame nerfs, designed and made by Cannondale... Still no one else doing it this way)
Not true Some older AC nerfs go through the frame.
QUOTE
You can totally Moto-convert a Cannibal for about $2000 if you buy everything nearly new.
You'll spend that much on a stock used front end. (a-arms and shocks) Not includeing the other stuff you mentioned like nerfs, axle etc.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
Hey Hazmatt,
AC Racing only did their nerfs like that AFTER Cannondale did it, and they didn't do it very long. Not to mention that AC Racing's quality control leaves a LOT to be desired.
You may be able to spend that on a stock front end, but I have seen very nice Moto front ends sell for $1200, from Black Widow ATV even! I converted my wife's Glamis to Moto suspension, so I know exactly how much it costs to do it new or used!
AC Racing only did their nerfs like that AFTER Cannondale did it, and they didn't do it very long. Not to mention that AC Racing's quality control leaves a LOT to be desired.
You may be able to spend that on a stock front end, but I have seen very nice Moto front ends sell for $1200, from Black Widow ATV even! I converted my wife's Glamis to Moto suspension, so I know exactly how much it costs to do it new or used!