I've heard somewhere that if you use 400EX Spindles on a Cannondale it will handle better, is this true? Would I have too use a whole 400EX frontend (A-arms, Shocks, Spindles, Brakes) If so would it bolt right up or what? I'm going too be going with a new frontend over the winter, so I was wondering if I would be better off going with a whole 400EX Setup over a standard Cannondale one? Also heard that the 400EX front brake reservoir works better than the stock one, is this true?
Thanks
400EX Spindles?
To use 400 ex spindles you would have to change to a complete 400ex front end, or you can use some aftermarket C-dale a-arms from Diamond racing or Eyeball engineering. They use ball joints just like the honda setups, but with spacers. The reason the spindles will not simply bolt on is because the kingpin diameter is much larger on the cannondale ball joints.
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
400EX Spindles have 11 degrees of kingpin inclination, the Cannondale has 8. This means that with the 400EX spindles the machine will have more steering effort but will be more stable. If you prefer quick low effort steering the Cannondale uprights are the way to go. If you prefer more effort and slower steering go with the Honda uprights. They are not however interchangeable like Brad77 said.