help! please someone
help! please someone
Still blowning fuses .i have everything disconnected on my bike. every connetion and senor and it is still blowning fuses when i turn the key on. is it possible for the harness it self to be bad?
any suggestions please.:mad:
any suggestions please.:mad:
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
...Well, this has been pestering you for a while now, too bad. I could only say to look first at any areas where the harness actually rubs against the frame or hose clamps. And, you might check that the switch cable is not rubbed raw against the sharp lower edge of the steering clamp (hiding under that wonderful airfilter yoke!) ...after the visual checks if all OK, it would be time to call out the Ranger!
DangerRanger is the harness guru.![biggrin.gif](http://www.cannondaleriders.com/forums/style_emoticons/<#EMO_DIR#>/biggrin.gif)
DangerRanger is the harness guru.
![biggrin.gif](http://www.cannondaleriders.com/forums/style_emoticons/<#EMO_DIR#>/biggrin.gif)
thanks
yeah i've look as much as i can with it on the bike next step is to take it apart. yeah its weird it was running good. i was idling around camp and tryed to give it some more gas and it died. i sat there and tried starting it i for a minute or two. i then pull started my bike- i dont know if you can do this to cannondales but i did and it started again. i let it idle and then gave it some more gas and it died again. tried starting it again and that when its been blowing fuses. it use to be only when you hit the start button but now its when you turn on the key
yeah i've look as much as i can with it on the bike next step is to take it apart. yeah its weird it was running good. i was idling around camp and tryed to give it some more gas and it died. i sat there and tried starting it i for a minute or two. i then pull started my bike- i dont know if you can do this to cannondales but i did and it started again. i let it idle and then gave it some more gas and it died again. tried starting it again and that when its been blowing fuses. it use to be only when you hit the start button but now its when you turn on the key
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm
-
- Posts: 0
- Joined: Wed Mar 10, 2021 10:41 pm